Talk to Us
Chat with a Real Person
Only logged in customers who have purchased this product may leave a review.
ChromaLuxe Natural Wood Panel
$5.00
Sizing Info: 10 x 10 x 0.625
Country Of Origin: United States
Reviews (0)
Details
ChromaLuxe® Natural Wood Sublimation Plaque Panel 10" x 10" x 0.625" Clear Matte on Maple
ChromaLuxe® Natural Wood Sublimation Plaque Panel, 10" x 10" x 0.625", Clear Matte on Maple. ChromaLuxe® Natural Wood Photo Panels provide a vibrancy and durability that make it the best photo on wood in the market. These are made with Maple Veneer with a low gloss Clear Matte ChromaLuxe coating and they have pre-drilled keyholes on the back that make them ready to hang.
ChromaLuxe Natural Wood panels are sourced from renewable forestry wood supplies and then coated with Matte Clear finish. The latest fade tests show that ChromaLuxe prints will last a lifetime with resistance to yellowing and climate damage
Instructions
Chromaluxe Natural Wood Photo Panel Sublimation Instructions
Instruction Details
Temperature: 400
Time: 1 minute 45 seconds
Pressure: Heavy
Prepress: 20 Seconds
Additional: Heat Tape
Paper: DYETRANS SPP (All printers) TEXPRINT DT (Ricoh/Sawgrass Printers) TEXPRINT Light (Epson Printers)
Product ID: U4530
Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Place substrate face up on bottom table, cover with protective paper, and pre-press for 20 seconds. Do not skip this step. After cooling, dry any remaining moisture on the substrate.
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Cover it all with a piece of Poly Poplin Fabric. and press according to time, temperature, and pressure above.
2. Place substrate face up on bottom table, cover with protective paper, and pre-press for 20 seconds. Do not skip this step. After cooling, dry any remaining moisture on the substrate.
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Cover it all with a piece of Poly Poplin Fabric. and press according to time, temperature, and pressure above.
Reviews
There are no reviews yet.