Talk to Us
Chat with a Real Person
Only logged in customers who have purchased this product may leave a review.
Car Flag – Single-Ply with 13″ Pole – Dual Side Print
$8.00
Sizing Info: 7.5 x 10
Country Of Origin: United States
Reviews (0)
Details
Car Flag Small 7.5" x 10" Single Ply White (Flag Only)
Small, Single Ply, Car Flag - Pole not included. A great sublimatable gift! Customize these flags with sports logos, school mascots, business ads, and more!
ADDITIONAL DETAILS
- Dimensions: 7.5" x 10"
- Car flagpole not included
(FLAGPOLE01 sold separately) - Please Note:
This product is hand-sewn
Flags may vary up to 3/4" from nominal size (tolerance of +/- .25")
May not have perfect 90-degree corners or perfectly straight edges
Please measure your item and check against the template before pressing
Instructions
Car Flag Sublimation Instructions
Instruction Details
Temperature: 400
Time: 55 Seconds
Pressure: Medium
Prepress: 10 Seconds
Additional: Adhesive Spray, Lint Roller
Paper: DYETRANS SPP (All printers) TEXPRINT DT (Ricoh/Sawgrass Printers) TEXPRINT Light (Epson Printers)
Instructions
1. Cover the bottom TABLE of the press WITH a sheet of protective paper.
2. Lint roll the IMAGE area of the substrate.
3. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 10 seconds.
4. Secure transfer TO substrate USING Adhesive Spray.
5. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table. FOR double-sided flags place a piece of protective paper BETWEEN the layers of the flag TO prevent sublimation blow- through TO the other side.
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.
Application notes: The dimensional tolerance ON these items IS +/- 3/8". make sure you have sufficient bleed of your image to account for a length or width overage.
2. Lint roll the IMAGE area of the substrate.
3. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 10 seconds.
4. Secure transfer TO substrate USING Adhesive Spray.
5. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table. FOR double-sided flags place a piece of protective paper BETWEEN the layers of the flag TO prevent sublimation blow- through TO the other side.
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.
Application notes: The dimensional tolerance ON these items IS +/- 3/8". make sure you have sufficient bleed of your image to account for a length or width overage.
Reviews
There are no reviews yet.