Talk to Us
Chat with a Real Person
Only logged in customers who have purchased this product may leave a review.
Car Flag – Double-Ply with 13″ Pole – Dual Side Print
$10.00
Sizing Info: 7.5 x 10.5
Country Of Origin: United States
Reviews (0)
Details
Car Flag Small 7.5" x 10.5" Double Ply White (flag only)
DyeTrans Flag for the Car, Small, 7.5" x 10.5", Double Ply, White.
Car pole available (FLAGPOLE01 sold separately), makes a great event item!
Accessorize the whole automobile with sublimatable car mats, trailer hitch covers, license plate and car flags (sold separately).
Keep in mind this product is hand-sewn so flags may vary up to 3/4" from nominal size (tolerance of +/- .25") and may not have perfect 90 degree corners or perfectly straight edges. Please measure your item and check against the template before pressing
Instructions
Car Flag Sublimation Instructions
Instruction Details
Temperature: 400
Time: 55 Seconds
Pressure: Medium
Prepress: 10 Seconds
Additional: Adhesive Spray, Lint Roller
Paper: DYETRANS SPP (All printers) TEXPRINT DT (Ricoh/Sawgrass Printers) TEXPRINT Light (Epson Printers)
Instructions
1. Cover the bottom TABLE of the press WITH a sheet of protective paper.
2. Lint roll the IMAGE area of the substrate.
3. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 10 seconds.
4. Secure transfer TO substrate USING Adhesive Spray.
5. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table. FOR double-sided flags place a piece of protective paper BETWEEN the layers of the flag TO prevent sublimation blow- through TO the other side.
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.
Application notes: The dimensional tolerance ON these items IS +/- 3/8". make sure you have sufficient bleed of your image to account for a length or width overage.
2. Lint roll the IMAGE area of the substrate.
3. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 10 seconds.
4. Secure transfer TO substrate USING Adhesive Spray.
5. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table. FOR double-sided flags place a piece of protective paper BETWEEN the layers of the flag TO prevent sublimation blow- through TO the other side.
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.
Application notes: The dimensional tolerance ON these items IS +/- 3/8". make sure you have sufficient bleed of your image to account for a length or width overage.
Reviews
There are no reviews yet.