Description
Car Flag Sublimation Instructions
Instruction Details
Temperature: 400
Time: 55 Seconds
Pressure: Medium
Prepress: 10 Seconds
Additional: Adhesive Spray, Lint Roller
Paper: TEXPRINT DT (Ricoh AND Virtuoso Printers) OR TEXPRINT DT LT (Epson Printers)
Product ID: FLAG01
Instructions
1. Cover the bottom TABLE of the press WITH a sheet of protective paper.
2. Lint roll the IMAGE area of the substrate.
3. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 10 seconds.
4. Secure transfer TO substrate USING Adhesive Spray.
5. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table. FOR double-sided flags place a piece of protective paper BETWEEN the layers of the flag TO prevent sublimation blow- through TO the other side.
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.Application notes: The dimensional tolerance ON these items IS +/- 3/8″. make sure you have sufficient bleed of your image to account for a length or width overage.
Stack Order for Heat Press
HEAT PRESS PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE
Heat Press Pressure Cheat Sheet
Level
PSI
Press Dial Level
Average Human
Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
Where the platen
just makes physical
contact with product
Light Pressure
20 psi
2 on press dial
Resistant with one
arm pressing down,
easy with two arms
Medium Pressure
40-60 psi
3-5 on press dial
Resistant with two
arms pressing down,
doesn't require usage
of shoulders
Heavy Pressure
80 psi
6 and up on dial
Very resistant with
two arms pressing down,
requires lifting of elbows
and shoulders to lock
in place
Reviews
There are no reviews yet.