Description
Color Changing Mug Sublimation Instructions
Instruction Details
Temperature: 385
Time: 4
Pressure: Medium
Prepress:
Additional: Heat Tape
Paper: TexPrint
Product ID: 3001
Instructions
1. Secure transfer to the Ceramic Mug using Heat Tape.
2. Top with protective paper, taking care not to extend the paper well above or below the top and bottom of the mug.
3. Place Ceramic Mug in Mug Press and close the heating element around the mug.
4. Press according 4 mins, 400 degrees, and medium pressure.
5. Remove any paper residue with a soft wet cloth or dish sponge.
Application notes: The typical imaging area for a mug is 1.25″ in
FROM the handle AND .25″ from the top and bottom sides of the mug.
Place heat tape on the transfer edges closest to the handle that does not have sublimation ink on it after you have aligned the image on the mug. Use heat tape to attach the transfer to the mug taking care not to cover any of the imaging area. Use a fan to cool ceramic mugs or the A6000 Kool Plate. Do not dunk mugs in water.
2. Top with protective paper, taking care not to extend the paper well above or below the top and bottom of the mug.
3. Place Ceramic Mug in Mug Press and close the heating element around the mug.
4. Press according 4 mins, 400 degrees, and medium pressure.
5. Remove any paper residue with a soft wet cloth or dish sponge.
Application notes: The typical imaging area for a mug is 1.25″ in
FROM the handle AND .25″ from the top and bottom sides of the mug.
Place heat tape on the transfer edges closest to the handle that does not have sublimation ink on it after you have aligned the image on the mug. Use heat tape to attach the transfer to the mug taking care not to cover any of the imaging area. Use a fan to cool ceramic mugs or the A6000 Kool Plate. Do not dunk mugs in water.
Oven Method Instructions
Instructions for Using an Oven and DYEWRAP
1. Secure transfer to the Ceramic Mug using Heat Tape.
2. Wrap and secure DYEWRAP, over transfer, to the Ceramic Mug. Take care to ensure the transfer is not wrinkled under the wrap.
3. Place in 400° preheated oven for 15 minutes.
4. Remove mug from oven and immediately remove transfer and wrap and allow to cool under a fan.
2. Wrap and secure DYEWRAP, over transfer, to the Ceramic Mug. Take care to ensure the transfer is not wrinkled under the wrap.
3. Place in 400° preheated oven for 15 minutes.
4. Remove mug from oven and immediately remove transfer and wrap and allow to cool under a fan.
Reviews
There are no reviews yet.