Description
UNISUB MDF Coaster Sublimation Instructions
Instruction Details
Temperature: 355
Time: 110 Seconds
Pressure: Medium
Prepress: 20 Seconds
Additional: Heat Tape
Paper: Multi-Purpose
Product ID: U1009-M
Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
*To sublimate cork backing, follow the same instructions as above.
2. Secure transfer to substrate using Adhesive Spray.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
*To sublimate cork backing, follow the same instructions as above.
Stack Order for Heat Press
HEAT PRESS PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE
Heat Press Pressure Cheat Sheet
Level
PSI
Press Dial Level
Average Human
Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
Where the platen
just makes
physical contact
with product
Light Pressure
20 psi
2 on press dial
Resistant with
one arm pressing
down, easy with
two arms
Medium Pressure
40-60 psi
3-5 on press dial
Resistant with two arms
pressing down, doesn't
require usage of shoulders
Heavy Pressure
80 psi
6 and up on dial
Very resistant with
two arms pressing down,
requires lifting of elbows and
shoulders to lock in place
Reviews
There are no reviews yet.