Description
Chromaluxe Wood Photo Panel Sublimation Instructions
Instruction Details
Temperature: 400
Time: 1 MINUTE 30 seconds
Pressure: Heavy
Prepress: 20 Seconds
Additional: Heat Tape
Paper: TEXPRINT DT (Ricoh AND Virtuoso Printers) OR TEXPRINT DT LT (Epson Printers)
Product ID: U4723
Instructions
1. Cover the bottom TABLE of the press WITH a sheet of protective paper.
2. Place substrate face up ON bottom TABLE, cover WITH protective paper, AND pre-press FOR 20 seconds. DO NOT skip this step. AFTER cooling, dry ANY remaining moisture ON the substrate.
3. Secure transfer TO substrate USING Adhesive Spray OR Heat Tape.
4. Place substrate face up, WITH attached transfer face down, ON top of protective paper ON bottom table.
5. Cover it ALL WITH a piece of Poly Poplin Fabric
6. Top WITH protective paper AND press according TO TIME, temperature, AND pressure above.
Stack Order for Heat Press
HEAT PRESS PLATEN
POLYPOPLIN FABRIC
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE
Heat Press Pressure Cheat Sheet
Level
PSI
Press Dial Level
Average Human
Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
Where the platen
just makes physical
contact with product
Light Pressure
20 psi
2 on press dial
Resistant with two
arms pressing down,
doesn't require usage
of shoulders
Medium Pressure
40-60 psi
3-5 on press dial
Resistant with two
arms pressing down,
doesn't require usage
of shoulders
Heavy Pressure
6 and up on dial
3-5 on press dial
Very resistant with
two arms pressing down,
requires lifting of elbows
and shoulders to lock
in place
Reviews
There are no reviews yet.