Description
Unisub Hardboard Magnet Sublimation Instructions
Instruction Details
Temperature: 375
Time: 45 seconds
Pressure: Medium
Prepress:
Additional: Heat Tape
Paper: TEXPRINT DT (Ricoh and Virtuoso Printers) or TEXPRINT DT LT (Epson Printers)
Product ID: U4052
Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Stack Order for Heat Press
HEAT PRESS PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE
Heat Press Pressure Cheat Sheet
Level
PSI
Press Dial Level
Average Human
Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
Where the platen
just makes
physical contact
with product
Light Pressure
20 psi
2 on press dial
Resistant with
one arm pressing
down, easy with
two arms
Medium Pressure
40-60 psi
3-5 on press dial
Resistant with two arms
pressing down, doesn't
require usage of shoulders
Heavy Pressure
80 psi
6 and up on dial
Very resistant with
two arms pressing down,
requires lifting of elbows and
shoulders to lock in place
Reviews
There are no reviews yet.